On Philippine roads, the
IL300 Solar Road Stud is playing an important role in providing drivers with a safe driving environment. So how does such efficient lighting come to be installed on the road?
First, installing the
IL300 Solar Road Stud requires choosing a suitable location. Typically, these locations are at the edge of the road or near traffic signs to maximize their lighting effect. After selecting the location, the installer needs to clean up and ensure that the surface of the installation area is clean and tidy so that the
IL300 Solar Road Stud can be firmly fixed on the road.
Next, the installer needs to measure and position. Use professional measuring tools to determine where each
IL300 Solar Road Stud should be installed, and mark it with a marker. This ensures that each
Solar Road Stud is installed in the correct location and conforms to the direction and curvature of the road.
The installers then began drilling holes. Special drill bits and electric drills are used to drill holes in the road. The depth and size of these holes are determined according to the dimensions of the
IL300 Solar Road Stud. Care must be taken during the drilling process to avoid damaging the road surface or nearby facilities.
Next, the installer inserts the
IL300 Solar Road Stud into the hole. Each Solar Road Stud comes with specialized fixings and nuts to ensure it stays securely on the road. The installer needs to use a screwdriver or power tool to tighten the fixings and nuts to ensure that the
IL300 Solar Road Stud will not loosen or fall off.
Finally, the installer will inspect and test the installation results. They need to ensure that each
IL300 Solar Road Stud is installed securely and stably and works properly. During the test process, they will use professional testing tools to test each road stud to check whether its reflective effect and lighting brightness meet the requirements.
In general, the installation process of
IL300 Solar Road Stud requires professional skills and tools, and every step needs to be completed carefully. Only in this way can we ensure that the
IL300 Solar Road Stud can be installed firmly and stably on the road and play its due role in providing a safe driving environment for drivers.
